Quick and simple cleaning is all that is required

After carefully applying the SiOO:X base coat and finish coat, all you have to do is wash the wood surface as needed. This is enough to keep the wood healthy and maintain a lovely light-grey luster for many years to come. One tip is to do any necessary maintenance on your decking at the start and end of the season. This minimizes the risk of growth during winter and makes maintenance easier.

Can be used on both new and old wood.

Instructions

Diluting with water: Dilute 1 deciliter of SiOO:X Maintenance Wash in 8 litres  of lukewarm water. If necessary increase the amount to 2 deciliters. Spread the mixture on the surface with a soft brush, leave on for 20 min. Carefully brush the surface with the soft brush and then rinse well. Allow the surface to dry before placing furniture, etc. on it.

Keep in mind

• Do not use a pressure washer. It can damage the outer layer of the wood protection.
• Do not use cleaners that contain oil, such as soap. Oil residues can discolor the wood and also attract algae and mildew. If you should nevertheless choose to use this type of cleaner – thoroughly rinse the wood surface with water afterwards.
• Do not clean with deck wash or other strong alkaline products. Such cleaners can damage the outer layer of the wood protection.
• If superficial algae growth occurs (most common in shaded, damp areas), first wash with our maintenance wash. Should the algae persist, use an algaecide.

Contents

5–15% anionic and nonionic surfactants.

Keep out of reach for children. Sort rinsed packaging as hard plastic.